HR4013C
40 mm 8.0 J Rotary Hammer, SDS-MAX
An efficient 1 100 W combi hammer with a unique AVT anti-vibration system for SDS-MAX blades. Masonry drilling capacity of 40 mm and impact energy of 8.0 J. With its drilling and chipping functions, this tool is an ideal choice for renovation and building work.
Technologies and functions
avt
AVT
soft-no-load
Soft no load
double-insulation
Double Insulation
variable-speed
Variable Speed
adapted-for-sds-max-bits
Adapted for SDS-MAX bits
torque-limiter
Torque Limiter
constant-speed
Constant Speed
soft-start
Soft Start
dust-collection
Dust Collection
Advantages
- Powerful 1,100 W motor delivers 8.0 J of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5 m/s²
- Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
- Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism efffectively isolating most of the vibration away from the user
- Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
- Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- LED service light notifies the user approximately 8 hours before the brushes need to be replaced
- LED power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Depth gauge for increased drilling consistency
- Double insulated
Specifications
Capacity, mm
40
Impact Energy, J
8
Тип патрона_ENG
Adapted for SDS-MAX bits
Тип патрона_RUS
Адаптирован под SDS-MAX
Type of motor
Brush
Continuous Input Power, W
1100
No load speed, rpm
250—500
Impacts per Minute, ipm
1450–2900
Quick change drill chuck
Torque limiter
Variable speed
Constant speed
Net Weight, kg
6.8 кг
Ps_cord
4.0 м
Capacity concrete, mm
40
Capacity masonry, mm
40
Capacity core cutter, mm
80
Sound pressure level, dB
92
Sound power level, dB
103
Noise K factor, dB
3
Carbon brush
350
Depth, mm
479
Width, mm
112
Height, mm
263
Code EAN
0088381651332
Packaged Width, mm
180
Packaged Depth, mm
650
Packaged Height, mm
450
Weight (package), kg
11.88
HS code
8467219900
Downloads