52 mm 19.1 J Rotary Hammer, SDS-MAX

HR5212C

An efficient 1 510 W combi hammer with a unique AVT anti-vibration system for SDS-MAX blades. Masonry drilling capacity of 52 mm and impact energy of 19.1 J. With its drilling and chipping functions, this tool is an ideal choice for renovation and building work.

Technologies and functions Advantages Specifications Downloads

Technologies and functions

Advantages

Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 9 m/s²
Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user both at the rear handle and side handle
Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
LED service light notifies the user approximately 8 hours before the brushes need to be replaced
LED power light indicates switch failure or cord damage
Variable speed control dial enables user to match the speed to the application for greater versatility
Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
Depth gauge for increased drilling consistency
Double insulated

Specifications

Capacity, mm 52

Impact Energy, J 19.1

Тип патрона_ENG Adapted for SDS-MAX bits

Тип патрона_RUS Адаптирован под SDS-MAX

Type of motor Brush

Continuous Input Power, W 1510

No load speed, rpm 150–300

Impacts per Minute, ipm 1100–2250

Quick change drill chuck

Torque limiter

Variable speed

Constant speed

Net Weight, kg 11.9 кг

Ps_cord 4.0 м

Capacity concrete, mm 52

Capacity masonry, mm 52

Capacity core cutter, mm 80

Sound pressure level, dB 98

Sound power level, dB 109

Noise K factor, dB 3

Carbon brush 175

Depth, mm 599

Width, mm 140

Height, mm 287

Code EAN 0088381677578

Packaged Width, mm 174

Packaged Depth, mm 651

Packaged Height, mm 447

Weight (package), kg 18.5

HS code 8467219900

Downloads

declaration
of conformity