Cordless Impact Driver 40V max XGT® BL, 220 Nm

TD002GZ01

Cordless Impact Driver 40V max XGT® BL, 220 Nm

Battery and charger are sold separately.

A powerful, high‑tech impact driver with increased fastening speed and a wide range of adjustable operating modes: 4 impact power settings, 2 T‑modes for metal, 3 Bolt modes, 1 Wood mode.

Technologies and functions Advantages Specifications Downloads

Technologies and functions

Advantages

More comfortable operation in a wide range of applications from light-duty screw tightening to heavy-duty metal fastening
Dual spring technology
The hammer is designed to be driven by a dual spring unit consisting of two types of springs with different load capacities
The hammer is driven by one spring in light-duty operation, and by two springs in heavy-duty operation
Thus, the impact power is adjusted according to the workload, providing added comfort in a wide range of applications from delicate screw tightening to heavy-duty metal fastening
The above-mentioned optimal impact blow suppresses increase in recoil and vibration, which occur after the tool starts impact blow (The two effects have been confirmed through the tests using 120 mm coarse thread screw)
4 LEDs on the front of tool headBrighter illumination on the workpiece obtained by: locating 4 LEDs on the front of tool head, reducing projections that project from both sides of tool head and body
Higher visibility of the workpiece achieved by using a newly designed LED lens to make the shadow of bit lighter: With preglow and afterglow functions, brightness settings
Increased screw tightening speed
Compared with our current models, increased screw tightening speed has been achieved by increasing the number of impacts in Mode 4 (Max impact mode)
New appearance design: The current design has been changed by adding camouflage pattern and more
Light mode to turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again
The light turns off automatically one hour after turned on
New one-touch bit installation
Reduced resistance allows for easier bit installation
High Power 220 Nm
Genuine solution for high demand industrial users
Having excellent ability to perform heavy-duty continuous tightening
Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
Multiple operation modes for a wide range of applications
4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
Improved bolt modes for more convenience in tightening machine screws
Constant speed control maintains fastening torque by minimizing the rotation speed reduction caused by decreased battery capacity
One-touch speed selector provides precise fastening control for a wide range of applications
Enhanced anvil holder rigidity
Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
Variable speed control by trigger for precise fastening in a wide variety of applications
Ergonomically designed handle with rubberized soft grip for increased comfort
Reversing switch is conveniently located
Auto-stop in bolt mode (both in Forward/Reverse rotations)
Electric brake for maximum productivity
Trigger lock minimizes accidental start-up during transportation
Durable, reversible belt clip convenient for temporary tool hanging
High water-resistance compatible with XPT
Battery protection circuit protects against overloading, over-discharging and over-heating

Specifications

Chuck size, mm 6.35

Максимальный крутящий момент затяжки, Нм 220

Type of drill chuck Hex Shank 6.35 mm (1/4")

Type of motor BLmotor

Max output 500

Режимы работы_ENG Impact power selection: 4 stages: Max / Hard/ Med. / Soft / 3 Bolt modes / Wood mode / T1 - mode / Т2 - mode

Крутящий момент затяжки, Нм 220 / 170 / 50 / 20

No load speed, rpm 0 - 3'700 / 0 - 3'200 / 0 - 2'100 / 0 - 1'100

Максимальная скорость, об/мин 3'700

Частота ударов в минуту, уд/мин_ENG 0 - 4'600 / 0 - 3'600 / 0 - 2'600 / 0 - 1'100

Размер крепежа_ENG Machine screw: M4 - M8 / Standard bolt: M5 - M16 / High strength bolt: M5 - M14 / Coarse thread (in length): 22 - 125 mm / Steel: 22 mm / Wood (Auger bit): 24 mm

Platform 40V max XGT®

Type of battery Li-Ion

Voltage, V 36

Charger

Compatible batteries 40V max: 8.0 Ah / 5.0 Ah / 4.0 Ah / 2.5 Ah / 2.0 Ah

Variable speed

Brake

Reversing

Constant speed

Built-in job light

Anti-restart function

Кнопка быстрого переключения режимов

Система подавления биения оснастки

Установка биты в одно касание

Net Weight, kg 1.7

Capacity hole saw, mm 38

Capacity steel, mm 22

Vibration level, m/s² 12.9

Vibration K factor, m/s² 1.5

Sound pressure level, dB 97

Sound power level, dB 105

Noise K factor, dB 3

Depth, mm 119

Width, mm 86

Height, mm 247

Code EAN 0088381767804

Packaged Width, mm 100

Packaged Depth, mm 210

Packaged Height, mm 150

Weight (package), kg 1.3

HS code 8467292000

Downloads

operating

manual